BVRPL - DURABOND D-510 FAST SET TILE MORTAR

  • MSDS: BVRPL
  • Manufacturer: DAP INC
  • Product Name: DURABOND D-510 FAST SET TILE MORTAR
  • National Stock Number: 8040-00F036357
Product Identification

Product ID:DURABOND D-510 FAST SET TILE MORTAR
MSDS Date:01/17/1992
FSC:8040
NIIN:00F036357
MSDS Number: BVRPL

Responsible Party
DAP INC
5300 HUBERVILLE RD
DAYTON, OH 45401-0277
US

Emergency Phone: 513-667-4461/800-543-3840

Info Phone: 513-667-4461/800-543-3840

Cage: 90300

Contractor
DAP INC.
277 DAYTON, OH 45401-0277 US

Telephone: 513-253-7154/800-543-3840

Cage: 90300

Ingredients

SILICON DIOXIDE, CRYSTALLINE QUARTZ, SAND (ANIMAL

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 60-65%

OSHA PEL 0.1 MG/CUM RESP DUST

ACGIH TLV: 0.1 MG/CUM RESP DUST


TRICALCIUM SILICATE, DICALCIUM

CAS: 65997-15-1

RTECS: VV8770000

Fraction By Weight: 25-30%

ACGIH TLV: 10 MG/CUM (DUST)


DOUBLE HYDRATED DOLOMITIC LIME

CAS: 39445-23-3

Fraction By Weight: 1-2%

OSHA PEL 5MG/CUM

ACGIH TLV: 5MG/CUM

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:WET CEMENT CAN DRY THE SKIN & CAUSE
ALKALI BURNS. EXPOSURE TO DUST MAY RESULT IN BUILD UP OF MATERIAL
IN EYES, EAR, NOSE & MOUTH WHICH MAY CAUSE IRRITATION. CHRONIC:
INHALATION OF DUST MAY RESULT IN P ULMONARY & RESPIRATORY DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:WET CEMENT CAN DRY THE SKIN & CAUSE ALKALI
BURNS. EXPOSURE TO DUST MAY RESULT IN BUILD UP OF MATERIAL IN EYES,
EAR, NOSE & MOUTH WHICH MAY CAUSE IRRITATION. CHRONIC: INHALATION
OF DUST MAY RESULT IN P ULMONARY & RESPIRATORY DAMAGE.
Medical Cond Aggravated by Exposure:ASTHMA & ASTHMA-LIKE CONDITIONS

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: WASH W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:>200F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE WATER SPRAY TO COOL EXPOSED SURFACES.

Accidental Release

Spill Release Procedures:VACUUM UP & REUSE EXCESS POWDER. PLACE
REMAINING POWDER INTO CONTAINERS. SLURRY MAY PLUG DRAINS.

Handling

Handling and Storage Precautions:STORE AWAY FROM CAUSTICS & OXIDIZERS.
KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. KEEP FROM EXCESSIVE
HEAT & FREEZING.
Other Precautions:PRODUCT FORMS AN ALKALI DISPERSION W/WATER. KEEP OUT
OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:8 HOUR EXPOSURE LIMIT/VALUE IS EXCEEDED FOR ANY
COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR.
Ventilation:IF DRY SANDING, PROVIDE SUFFICIENT MECHANICAL VENTILATION
TO MAINTAIN EXPOSURE BELOW PEL & TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:2.1-2.5
Solubility in Water:DISPERSES
Appearance and Odor:SANDY FREE-FLOWING GREY POWDER
Percent Volatiles by Volume:<1

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, STRONG OXIDIZERS, & CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT & FREEZING.
Hazardous Decomposition Products:CARBON OXIDES & NITROGEN OXIDES

Disposal

Waste Disposal Methods:DON'T REUSE EMPTY CONTAINERS. DISPOSE OF
IAW/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.